This Area is for anything to do with Star Trek & Star Wars Scale Modeling. If you want to post anything related to that, this is the place to do it. If you want to show Pictures related to Star Trek or Star Wars, you can do that too...
I haven't touched this in two months but if I have a current project this is it. ... ... http://img.photobucket.com/albums/v140/thetallman/Schematic_Fed_Texas1.jpg ... ... ... ... ... -- Edited by Woody at 14:41, 2008-03-16 ... ... -...
Well, I decided to get back into some Sci-Fi since I took a slight vacation.So I am making myself a Miranda Class starship.Not sure if I will make it the Relia...
... This is my first 1/2500 scale I have finished. It is the Cozmo's USS Goliath from a design by Chris "Woody" Wood, named the USS Samson. I took the model and changed some of it to look like Woody's original design.
...
... The mode...
... When I saw this model previewed, I knew I wanted to put a light in it. I bought this from http://www.minimodelmadness.com/store/ ... I started by looking at the different premade flashers I had. ... I found this with a red LED, from a Joint med...
... I bought the K-7 1/1000 scale model from www.minimodelmadness.com. This is a photo with PL 1/1000 1701.The arms are too long for the scale, so I will be shortening them.
...
...
... Here was my first light test, of the small cone a...
... Until my missing K-7 parts show up, I will be working full time on this.
... I am using the conversion parts, from http://www.minimodelmadness.com/store/. I have already been cutting on the parts, to ready the rear work, and the door. I plan t...
... Been messing around with this for about a year. Decided I couldn't do it straight. I wonder what Suzuki will have upo it's sleeve in a thousand years
...
...
... ...
... Per Tholian's advice, I am starting a new topic on new builds. What's your current or upcoming project? As of November 28th, I will be starting a kitbashed TOS era Destroyer from an 18 inch Ertl Enterprise kit. This will feature many of ...
I have started a TIE fighter, as seen in an episode of Droids animated series.
The first shot, I primed the solar panel wings. The second shot, I printed up the mask on self stick paper, then put each mask on, then used a black paint marker. The thi...
... Went to DC this weekend Past. There was a Figure Show down in Virginia and decided to head down so I could enter my Pieces. Wasn’t really planning to go to this Show, but my Buddy Doc told me that the National Capital Model Soldier S...
... Howdy Ya'll,
... Got my Klingon D-10 Heavy Cruisers (2 Each) from Odyssey Slipways today. These things are sweet! They're 1/2500 scale and excellent representations of this ship design from the FASA Star Trek RPG of the mid-80's.&...
I am sorry I have not been on this board much I have been rather busy .I know most of you may have seen this over at Hobby Talk ,but here is a link to my buildup of an ERTL smoothy refit . http://www.home.earthlink.net/~s.coffey/ERTL%20REFIT%20BUILDU...
I am building a Few models for a friend of mine, and here is one of them
The Steamrunner Class.
This kit is made by Starcrafts and is got a lot of nice detail. By the picture below, I just gave it the first Sanding ...
... Not sure if you guys know, but AMT/Ertl is coming back with some re-pops of the star trek line for the 40th Anniversary. They have only 4 up right now. Here is the URL to see....
... http://www.ertltoys.com...
...
...
...
...
... ...
... So I made Convesion Parts for the old kit, what do you all think 
... ...