Wooden floor bagging reasons. Floor was soaking wet. The main causes of bagging the floor is often subject to large blisters, following torrential rain not related windows into the rain erosion, water stains did not timely processing and immersion floor. After the floor was blisters, external upvc cladding sheet, arched floor volume increases, this problem because people often caused by improper handling. Wood flooring tight. If you are laying the dry season, when the humidity increases, the floor with the ambient humidity increases swelling width, the floor can not be tightly bolted together to make it stretch, only to swell up, causing bagging. Floor moisture content is too low.

In addition, there is a possibility of low moisture content of wood flooring, wood flooring too dry once wet deformation caused by water absorption transition bagging solve family flooring bagging on weekdays there are ways to use and cleaning as long as possible to keep the floor clean and dry, not too wet dripping cloth mop, not heavy or sharp weapon hit the ground, composite fence installed cost, you will not encounter bagging deformation, severe paint wear flowers phenomenon. If the wood floor bagging degree is relatively small, then the doors and windows, air-conditioning dehumidification function, control indoor humidity can restore itself.

If the arch is very serious degree, master recommend resurfacing and re-adjust the joints, remove baseboards stone to replace the old floor; dismantling the floor surface if damaged, should be replaced with new flooring. Choose a good product stability before paving. Paving of the isolation layer moisture, exterior waterproof flooring, water works, must comply with the requirements laid. When the floor surface coverings, leave enough expansion joints; after the completion of the pavement, and do not forget to strengthen wood floor maintenance, ventilation and indoor relative humidity control.